American Standard SYMPHONY 4501 User Manual download pdf

FINISHED WALL

TOP OF TUB RIM

BOTTOM OF TUB

74" FOR HEAD

CLEARANCE

3-5/8" REF.

1-5/8" TO 3-1/4"

18" OPTIONAL

5-1/8" REF.

1/2" NPT

1/2" NPT''

6-3/4"

3-5/8"

5-1/2" REF.

"SEE ILLUSTRATION "

Certiﬁed to comply with ANSI A112.18.1

THREADED INLETS

INLETS 3-3/8"

INLETS 1/2" NPT

3-3/8"

SHR. 1/2" NPT

TUB PORT 1/2" NPT

ROUGHING-IN DIMENSIONS

Installation

Instructions

To assure proper positioning in relation

to wall, note roughing-in dimensions.

4501

4501S

SYMPHONY

ROUGHING-IN

Turn off water at main supply.

CAUTION

When soldering, remove PLASTER GUARD, CARTRIDGES and CHECK STOPS (IF PRESENT). When ﬁnished soldering,

ﬂush valve body, replace cartridges, check stops (if present) and plaster guard to continue installation. Use thread

sealant or Teﬂon tape on threaded connections.

NOTE

If the valve is installed on a ﬁberglass

or other thin wall application, the

PLASTER GUARD (4) can be used as a support.

Connect hot and cold water supplies.

Cap off shower pipe (5) and tub ﬁller pipe (6).

For support, use pipe BRACES (7) secured to wooden braces.

With valve turned off, turn on water supplies. Check for leaks.

COLD

HOT

Cut a 4" dia. hole in the shower stall.

Drill two additional 1" holes to allow access

to the stops.

Remove PLASTER GUARD (4), rotate 90˚

so that indicated screw holes ﬁt MANIFOLD (2).

Push CAP on valve, place ESCUTCHEON on and

attach with screws.

See Roughing-in diagram before starting.

Connections are:

1/2" female NPT for threaded inlets

Connect RISER PIPE (1) to MANIFOLD (2)

top outlet marked "SHR".

Connect TUB FILLER PIPE (3) at bottom

outlet marked "TUB".

For proper positioning the ﬁnished wall

must be within side wall of PLASTER

GUARD (4).

M968805 REV. 1.4

OPTIONAL TO FINISHED

FLOOR USUALLY

BETWEEN 65'' AND 80''

PRESSURE BALANCING BATH

AND SHOWER TRIM KITS

Thank you for selecting American-Standard...the benchmark

of ﬁne quality for over 100 years.

To ensure that your installation proceeds smoothly--please

read these instructions carefully before you begin.

1 2

Installation 1
Instructions 1

Summary of Contents

Page 1 - Instructions

FINISHED WALL4"TOP OF TUB RIMBOTTOM OF TUB 74" FOR HEADCLEARANCE3-5/8" REF.1-5/8" TO 3-1/4" 18" OPTIONAL5-1/8" REF.

Page 2

INSTALL TRIM24352197810116When ﬁnished tiling the wall, remove PLASTER GUARD (3).Push on CAP (1).Mount ESCUTCHEON (2) and with SCREWS (7).Install HAND

Comments to this Manuals

No comments

American Standard SYMPHONY 4501 User Manual

Browse online or download User Manual for Sanitary ware American Standard SYMPHONY 4501. American Standard SYMPHONY 4501 User's Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Sanitary ware American Standard SYMPHONY 4501