American Standard TROPIC CADET 2791 User Manual download pdf

RECOMMENDED TOOLS AND MATERIALS

Putty Knife Regular Screwdriver Adjustable Wrench Sealant Tape Measure

Hacksaw Wax Ring/Gasket Flexible Supply Tube Closet Bolts Carpenters Level

1 REMOVE OLD TOILET

a. Close toilet supply valve and flush tank completely. Towel or sponge remaining water from tank and bowl.

b. Disconnect and remove supply line. NOTE: If replacing valve, first shut off main water supply!

c. Remove old mounting hardware, remove toilet and plug floor waste opening to prevent escaping sewer gases.

d. Remove closet bolts from flange and clean away old wax, putty, etc. from base area.

NOTE: Mounting surface must be clean and level before new toilet is installed!

SAVE FOR FUTURE USE

CLOSET FLANGE

CLOSET BOLTS

7301102-100 Rev. K

CAUTION: PRODUCT IS FRAGILE. TO AVOID BREAKAGE AND POSSIBLE INJURY HANDLE WITH CARE!

Product names listed herein are trademarks of AS America, Inc.

NOTE: Pictures may not exactly define contour of china and components.

Tropic Cadet

3 2-piece Round Front,

Elongated, Right Height

™

Toilets

Models 2455 / 2457 / 2459 / 2791

Triumph Cadet

3 2-piece Round Front,

Elongated, Right Height

™

Toilets

Models 2490 / 2491 / 2492

FINISHED WALL

FINISHED

FLOOR

SUPPLY

REQ'D.

12"

(305mm)

WAX RING

SEALANT

INSTALL WAX SEAL

Invert toilet on floor (cushion to prevent damage), and

install wax ring evenly around waste flange (horn), with

tapered end of ring facing toilet. Apply a thin bead of

sealant around toilet base.

POSITION TOILET ON FLANGE

a. Unplug floor waste opening and install toilet on closet flange so bolts project

through mounting holes.

b. Loosely install retainer washers and nuts. Side of washers marked "THIS

SIDE UP" must face up!

CLOSET

BOLT

NUT

TAPERED

WASHER

FLANGE

INSTALLATION INSTRUCTIONS

CARE AND MAINTENANCE

Thank you for selecting American Standard - the benchmark of fine quality for over 100 years. To ensure this product is installed properly,

please read these instructions carefully before you begin. (Certain installations may require professional help.) Also be sure your

installation conforms to local codes.

INSTALL CLOSET BOLTS

Install closet bolts in flange channel, turn 90

, and slide

into place 6" (152 mm) apart and parallel to wall.

For 4007 Tanks: 12" (305mm)

ROUGHING-IN DIMENSIONS:

NOTE: Distance from wall to closet flange centerline must be as listed below:

1 2 3 4

Summary of Contents

Page 1 - CARE AND MAINTENANCE

RECOMMENDED TOOLS AND MATERIALSPutty Knife Regular Screwdriver Adjustable Wrench Sealant Tape MeasureHacksaw Wax Ring/Gasket Flexi

Page 2 - PLASTIC SUPPLY LINE

7301102-100 Rev. KRUBBER GASKETTANK MTG.BOLTS PRE-INSTALLED687INSTALL TOILETa. Position toilet squarely to wall and, with a rocking motion, press

Page 3 - CARE AND CLEANING

7301102-100 Rev. K10 11ADJUSTMENTS a. Adjust water level. Water level should be adjusted to level indicated on tank by adjusting float cup.S

Page 4 - REPAIR PARTS LIST

7301102-100 Rev. K- 4 -In the United States:American Standard BrandsP.O. Box 6820Piscataway, New Jersey 08855Attention: Director of Consumer AffairsF

Comments to this Manuals

No comments

American Standard TROPIC CADET 2791 User Manual

Browse online or download User Manual for Sanitary ware American Standard TROPIC CADET 2791. American Standard TROPIC CADET 2791 User's Manual [de]

Summary of Contents

Comments to this Manuals

Related products and manuals for Sanitary ware American Standard TROPIC CADET 2791