American Standard 4505SSF Installation Guide download pdf (Page 3)

SERVICE

Clogged CARTRIDGE outlets or inlets may cause reduced ﬂow.

To clean, ﬁrst turn off water supply then:

TEST INSTALLED FAUCET

Move HANDLE (1) into "off"

position.

With HANDLE (1) in "off" position,

unthread SPRAY (3) from HOSE (2).

Turn on water supplies.

Operate handle back to front,

in COLD and HOT positions, to

ﬂush water lines thoroughly.

Replace SPRAY (3) onto

HOSE (2).

SPRAY OPERATION

With FAUCET on press TOGGLE BUTTON (4)

on SPRAY (3) to switch from stream to spray.

Press and hold PAUSE BUTTON (5) to temporarily

stop ﬂow from SPRAY (3). Release PAUSE

BUTTON (5) to resume ﬂow fromSPRAY (3).

If faucet drips, operate HANDLE several times from "off" to "on." Do not

apply excessive force.

Remove INDEX BUTTON (1), loosen HANDLE SCREW (2) and remove HANDLE (3).

Unthread the ESCUTCHEON CAP (4). Unthread three MOUNTING SCREWS (5).

Lift CARTRIDGE (6) off MANIFOLD (7) and remove CARTRIDGE SEALS (8).

Place SEALS (8) into CARTRIDGE PORTS (6a).

Replace ESCUTCHEON CAP (4), HANDLE (3), tighten HANDLE SCREW (1) and install INDEX BUTTON (2).

Clean MANIFOLD (7), CARTRIDGE (6) ports and SEALS (8).

Place CARTRIDGE (6) onto MANIFOLD (7) and tighten MOUNTING SCREWS (5) alternately.

Check connections for leaks.

(See Section 4)

CARE:

DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH.

DO NOT: DO NOT CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS, OR A

CLOTH WITH A COARSE SURFACE.

REMOVE

STREAM (AERATOR)

SPRAY

M965053

1 2 3

No comments

American Standard 4505SSF Installation Guide Page 3