American Standard 4505SSF Installation Guide download pdf (Page 2)

CHECK CONNECTIONS

FOR LEAKS

CHECK CONNECTIONS FOR LEAKS.

Move HANDLE down into "off" position.

Turn on water supplies and check connections for leaks

Operate HANDLE (2) up and down, left and right to ﬂush

water lines thoroughly.

Operate HAND SPRAY and check connections for leaks.

MAKE WATER SUPPLY CONNECTIONS

INSTALL WEIGHT

With HAND SPRAY (1) seated in SPOUT (2),

install WEIGHT (4) onto HOSE (3)

using two SCREWS (5). Locate the WEIGHT (4)

16 inches from the underside of the sink deck.

Tighten SCREWS (5) ﬁrmly.

Turn off hot and cold water supplies before beginning.

Connect FLEXIBLE SUPPLIES (1, 2) directly

to wall supplies. Connection on ﬁtting

supplies are 3/8" compression. Connect

left supply (Marked with a Red Stripe) to Hot

and right supply (Marked with Blue Stripe) to

Cold wall supply. Use adjustable wrench to

tighten connections. Do not over tighten.

Faucet supplies are 21" long from faucet base.

Note: If additional supply length is

required, installer must purchase

additional parts separately.

Important: If SUPPLY HOSES (1, 2) are

too long, loop as illustrated to avoid kinking.

16"

COLD

HOT

M965053

1 2 3

No comments

American Standard 4505SSF Installation Guide Page 2