American Standard 4433.001.002 Installation Guide

Browse online or download Installation Guide for Sanitary ware American Standard 4433.001.002. American Standard 4433.001.002 Installation Guide User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 4
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
SINGLE CONTROL KITCHEN
FAUCET WITH CAST SPOUT
Installation
Instructions
Certified to comply with ANSI A112.18.1M
4433.001
4433.001F15
1
9
3
AB
CAUTION
1
INSTALL FAUCET WITH OR WITHOUT DECK ESCUTCHEON
Turn off hot and cold water
supplies before beginning.
PUTTY
SINK OR
MOUNTING
SURFACE
Plumbers' Putty or Caulking
Adjustable Wrench
Phillips Screwdriver
Recommended tools
Regular Screwdriver
2
M965115_Rev.1.5
QUINCE™
Assemble RUBBER WASHER (4), BRASS WASHER (5), and threaded LOCKNUT (6) onto SHANK (3) from underside
of sink or mounting surface. Hand tighten LOCKNUT (6) and check that rotation of HANDLE (7) from HOT to COLD
is centered.
Use a screwdriver to tighten SCREWS (8) on LOCKNUT (6). Work your way around LOCKNUT (6), tightening
the screws slightly each time until all are snug to ensure even pressure.
Make certain the SEAL (9) is properly seated in recess of spout base.
(A) Installation with ESCUTCHEON (1). Apply a bead of putty to bottom edge of ESCUTCHEON with PUTTY PLATE (1).
Insert supply HOSES (2) and SHANK (3) through hole of ESCUTCHEON with PUTTY PLATE (1) and mounting surface.
Follow mounting instructions below to secure faucet to mounting surface.
(B) Installation less ESCUTCHEON (1). Insert all HOSES (2) and SHANK (3) through MOUNTING RING (10) and
mounting surface. Do not use putty.
4
5
6
8
Thank you for selecting American-Standard...
the benchmark of fine quality for over 100 years.
To ensure that your installation proceeds smoothly--
please read these instructions carefully before you begin.
7
4
5
6
8
7
9
10
3
2
Page view 0
1 2 3 4

Summary of Contents

Page 1 - 4433.001F15

SINGLE CONTROL KITCHENFAUCET WITH CAST SPOUTInstallationInstructionsCertified to comply with ANSI A112.18.1M4433.0014433.001F15193ABCAUTION1INSTALL FAU

Page 2 - M965115_Rev.1.5

On model with separate spray, place the SPRAY HOLDER (1)into the appropriate mounting hole. Assemble the SPRAYHOLDER WING NUT (2) onto the shank of SP

Page 3

M965115_Rev.1.5Spout leakage. If fitting leaks above or below SPOUT HUB remove SPOUT as followsand check SPOUT O-RINGS. First turn off water supply.Rem

Page 4 - FAUCET WITH CAST SPOUT

SINGLE CONTROL KITCHENFAUCET WITH CAST SPOUTM965115_Rev. 1.5QUINCE™MODEL NUMBERS050448-0070AWEIGHTA911758-0070ASEALM962980-YYY0AESCUTCHEON ANDPUTTY PL

Comments to this Manuals

No comments