American Standard Dazzle 6028.201 User Manual

Browse online or download User Manual for Sanitary ware American Standard Dazzle 6028.201. American Standard Dazzle 6028.201 User's Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 6
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
M968833 REV. 1.2
6028.201
DAZZLE
Certified to comply with ANSI A112.18.1
Installation
Instructions
Centerset Lavatory Faucet with
Speed Connect™ Drain
Adjustable Wrench Screwdriver Channel Locks
Required tools
Tubing Cutter
1
INSTALL FAUCET
SINK OR
MOUNTING
SURFACE
POP-UP
CABLE
Turn off hot and cold water supplies before beginning.
Note: Putty is not required unless mounting surface
is uneven. Apply a bead of PUTTY along the edge of
the underside of the BODY (1) if required.
Insert FAUCET (1) and CABLE CONNECTOR (2) through
mounting holes of Sink or mounting surface.
Fig. A.
Assemble LOCKNUTS (3) onto SHANKS (4) from under
side of Sink. Hand tighten firmly.
Fig. B.
2
2
4
3
3
4
1
Turn off hot and cold water
supplies before beginning.
CAUTION
(HAND TIGHTEN)
Fig. A.
Fig. B.
1
PUTTY
(IF REQUIRED)
Congratulations on purchasing your American Standard
faucet with Speed Connect drain, a feature found only on
American Standard faucets.
*Your new American Standard faucet is designed to work only with the Speed Connect drain. Heplful tips for
removing your current drain can be found in the Troubleshooting section of these instructions.
To ensure that your installation proceeds smoothly-please read these instructions carefully before you begin.
Speed Connect™ Drain*
• Fewer parts, installs in less time
• Never needs adjustment
• Guaranteed to seal properly the first time, every time.
Page view 0
1 2 3 4 5 6

Summary of Contents

Page 1 - Instructions

M968833 REV. 1.26028.201DAZZLECertified to comply with ANSI A112.18.1InstallationInstructionsCenterset Lavatory Faucet withSpeed Connect™ Drain Adjusta

Page 2 - M968833 REV. 1.2

M968833 REV. 1.2Thread FLANGE (1) counter-clockwise and removeFLANGE (1) and FOAM GASKET (2) from drainbody. Fig. A.Thread LOCKNUT (3) clock-wise to b

Page 3 - ATTACH CABLE CONNECTOR

M968833 REV. 1.2COMPRESSIONNUT3/8” COMPRESSIONCONNECTIONCOUPLINGNUTFLEXIBLESUPPLIES3/8 O.D.BULL-NOSERISERSOperate LIFT KNOB (1) to verify that STOPPER

Page 4 - Turn valve to OFF position

M968833 REV. 1.2214SERVICE10TEST INSTALLED FITTINGWith HANDLES (1) in OFF position, turn on WATERSUPPLIES (2) and check all connections for leaks.Remo

Page 5 - Speed Connect™ Drain

M968833 REV. 1.2Speed Connect™ DrainTroubleshooting GuideDisconnect the Cable from the Drain by threading the Cable Connector (1) counter-clockwise. F

Page 6

M968833 REV. 1.2STOPPER INSTALLATION PROCEDURELocked Mode: Look at the Plastic Loop at the bottom of the Stopper and noticethat the Loop is on one sid

Comments to this Manuals

No comments