American Standard Amarilis 8871 User Manual download pdf

8871

SLOT

MOUNTING

SURFACE

Turn off hot and cold water

supplies before beginning.

CAUTION

Insert SPOUT (1) and CABLE CONNECTOR (2) through center hole, making sure

the SPOUT SEAL WASHER (3) is properly seated.

Assemble RUBBER WASHER (4), BRASS WASHER (5) and LOCKNUT (6) onto SPOUT

SHANK (7) from under side of sink . Make sure SPOUT (1) is centered in the mounting

hole and the slot in the BRASS WASHER (5) faces toward the rear of the sink.

Tighten LOCKNUT (6) ﬁrmly. Fig. A.

Tighten LOCKNUT (11) with WRENCH (8) (supplied) to secure VALVE

BODY (13). Repeat above steps for opposite VALVE BODY (13A).

Install LOCKNUT (11) and RUBBER WASHER (12) onto VALVE BODY (13).

From under side of mounting surface, install VALVE BODY (13) through valve

mounting holes. Threads of VALVE BODY (13) should extent at least 5/16

of a inch above mounting surface top. Fig. B. Thread DECK ADAPTER (10)

onto VALVE BODY (13) until snug against internal stop. If necessary, adjust

LOCKNUT (11).

Certiﬁed to comply with ANSI A112.18.1

Installation

Instructions

INSTALL SPOUT

INSTALL VALVE BODY

13a

Place RUBBER RING (9) into DECK ADAPTER (10).

5/16'' MIN.

Adjustable Wrench Screwdriver Channel Locks

Recommended tools

Tubing Cutter

Fig. A.

Fig. B.

LEXINGTON Spread Lavatory

Faucet

with the Speed Connect™ Drain

Congratulations on purchasing your American Standard faucet

with the Speed Connect drain, a feature found only on

American Standard faucets.

*Your new American Standard faucet is designed to work only with the Speed Connect drain.

To ensure that your installation proceeds smoothly-please read these instructions carefully before you begin.

Speed Connect™ Drain*

• Fewer parts, installs in less time

• Never needs adjustment

• Guaranteed to seal properly the first time, every time.

M966230 Rev. 1.2

1 2 3 4 5 6

Summary of Contents

Page 1

88714625SLOTMOUNTINGSURFACETurn off hot and cold watersupplies before beginning.CAUTIONInsert SPOUT (1) and CABLE CONNECTOR (2) through center hole, m

Page 2 - Fig. A. Fig. B

WHITE FOAMGASKETNOT VISIBLEDRAINFLANGEFig. A. Fig. B.1DOWN6POP-UP KNOB (1) must be fully down. Fig. B. FLANGE GASKET AND POP-UP KNOBCheck DRAIN FLANG

Page 3 - CHECK OPERATION OF POP-UP

Thread CABLE CONNECTOR (1) clockwiseonto DRAIN BODY CONNECTION (2) andhand tighten. Fig. A.Your new POP-UP DRAIN installation isnow complete. Fig. B.N

Page 4 - TO CLEAN AERATOR

DO: SIMPLY RINSE THE PRODUCTCLEAN WITH CLEAR WATER. DRYWITH A SOFT COTTON FLANNELCLOTH.DO NOT: DO NOT CLEAN THEPRODUCT WITH SOAPS, ACID,POLISH, ABRAS

Page 5 - Speed Connect™ Drain

Speed Connect™ DrainTroubleshooting GuideDisconnect the Cable from the Drain by threading the Cable Connector (1) counter-clockwise. Fig. A.Look at th

Page 6

STOPPER INSTALLATION PROCEDURELocked Mode: Look at the Plastic Loop at the bottom of the Stopper and noticethat the Loop is on one side of the Stopper

Comments to this Manuals

No comments

American Standard Amarilis 8871 User Manual

Browse online or download User Manual for Sanitary ware American Standard Amarilis 8871. American Standard Amarilis 8871 User's Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Sanitary ware American Standard Amarilis 8871