American Standard Afwall Wall 1.6 GPF Flush Valve Wall-Mounted Toilets 2258 User Manual download pdf

SAVE FOR FUTURE USE

730484-100

Saniwares

Product names listed herein are trademarks of American Standard Inc.

Refer to instructions supplied with wall carrier for proper installation of 4-bolt support

system wall cavity requirements and rough-in information for waste outlet piping.

Closet Carrier Support

Putty Knife

Sealant

Tape Measure

Regular Screwdriver

Adjustable Wrench

Carpenters Level

Flush Valve

RECOMMENDED TOOLS AND MATERIALS

Pictures may not exactly define contour of china

Model 2254, 2256, 2257, 2258

AFWALL 1.6 GPF FLUSH VALVE

WALL-MOUNTED TOILETS

INSTALLATION INSTRUCTIONS

Thank you for selecting American Standard - the benchmark of fine quality for over 100 years. To ensure this

product is installed properly, please read these instructions carefully before you begin. (Certain installations may

require professional help.) Also be sure your installation conforms to local codes.

CAUTION: PRODUCT IS FRAGILE. TWO PEOPLE ARE RECOMMENDED FOR

HANDLING TO AVOID BREAKAGE AND POSSIBLE INJURY!

NOTE:

For proper operation product requires a minimum of 30 psi working line pressure

FIXTURE MOUNTING

Fixture studs should project

1-7/8" (48mm) from face of

finished wall.

Front View

Side View

FINISHED

WALL

1-7/8"

(48mm)

(4) STUDS

Meets the American Disabilities Act Guidelines and ANSI A117.1

Requirements for the Physically Challenged

When installed,

top of seat is

17" to 19"

(432mm to 483mm)

from the finished

floor.

FINISHED WALL

470mm

(18-1/2)

C/L OF SEAT POST

HOLES 140 mm

(5-1/2) CENTER

635mm

(25)

73mm

(2-7/8)

184mm

(7-1/4)

133mm

(5-1/4)

191mm

(7-1/2)

292mm

(11-1/2)

(4) 22mm

(7/8)

HOLES

375mm

(14-3/4)

C/L OF

OUTLET

121mm

(4-3/4)

FINISHED

FLOOR

32mm

(1-1/4)

381mm

(15)

432mm

(17)

381mm

(15)

432mm

(17)

1" N.P.T. OR C.W.T. SUPPLY

AS REQUIRED TO FLUSH VALVE

330mm

(13)

19mm

(3/4)

133mm

(5-1/4)

98mm

(3-7/8)

70mm

(2-3/4)

1-1/2 SPUD

C/L

229mm

(9)

FINISHED WALL

470mm

(18-1/2)

C/L OF SEAT POST HOLES

140mm(5-1/2) CENTERS

635mm

(25)

191mm

(7-1/2)

298mm

(11-3/4)

(4) 22mm (7/8)

DIA. HOLES

375mm

(14-3/4)

C/L OF

OUTLET

FINISHED

FLOOR

32mm

(1-1/4)

330mm

(13)

(3/4)

19mm

133mm

(5-1/4)

98mm

(3-7/8)

C/L

229mm

(9)

38mm (1-1/2) DIA. HOLE IN WALL

95mm

(3-3/4)

FOR WALLS UP TO 1" IN THICKNESS FOR EACH INCH

ADDITIONAL THICKNESS OF WALL ADD 25mm (1) TO

MEASUREMENT SHOWN

89mm

(3-1/2)

1" C.W.T. OR N.P.T. SUPPLY

AS REQ'D NOT FURNISHED

121mm

(4-3/4)

VACUUM BREAKER

76mm(3) DIA. HOLE IN WALL

FOR 1-1/2 SPUD

254mm

(10)

41mm

(1-5/8)

38mm

(1-1/2)

70mm

(2-3/4)

184mm

(7-1/4)

133mm

(5-1/4)

1 2

Summary of Contents

Page 1 - WALL-MOUNTED TOILETS

SAVE FOR FUTURE USE1730484-100SaniwaresProduct names listed herein are trademarks of American Standard Inc.© American Standard Inc. 2000 !2Refer to in

Page 2

Place back-up nuts on both bottom bolts, andthe top left-hand bolt only.Adjust the two lower back-up nuts so that frontface of nuts is flush with fini

Comments to this Manuals

No comments

American Standard Afwall Wall 1.6 GPF Flush Valve Wall-Mounted Toilets 2258 User Manual

Browse online or download User Manual for Unknown American Standard Afwall Wall 1.6 GPF Flush Valve Wall-Mounted Toilets 2258. American Standard Afwall Wall 1.6 GPF Flush Valve Wall-Mounted Toilets 2258 User's Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Unknown American Standard Afwall Wall 1.6 GPF Flush Valve Wall-Mounted Toilets 2258