American Standard 0615.000.020 Installation Guide download pdf

UNDERCOUNTER SINKS

INSTALLATION INSTRUCTIONS

Rectangular/Square Models: 0426, 0610, 0614, 0615, & 0618

Observe Local Plumbing and Building Codes.

Introduction: Thank you for selecting our products...products which have been the benchmarks of fine quality for years. To help

ensure that the installation process will proceed smoothly, please read these instructions carefully before you begin. Also, review

the recommended tools and materials list; carefully unpack and examine your new plumbing fixture.

NOTE: To avoid damage to

countertop, install sink such that

future removal from underneath the

countertop is possible.

First, make sure the clearance

between the backsplash, faucet,

fixtures and cabinets are

acceptable for the new sink.

For Model 0426 to be ADA

compliant the sink must be installed

with the overflow in the rear.

Carefully cut out the enclosed template, then position and trace the

template on the countertop as shown on the template. Make a mark of

the faucet hole centerline on the countertop. Drill a 1/2" pilot hole on

the inside of the cut line. Use a saber saw or a keyhole saw to cut out

the countertop opening.

730555-100 Rev. C

Adjustable Wrench

Channel Lock Pliers

Regular Screwdriver

Recommended Tools & Materials

Phillips Screwdriver

10'

Pipe Wrench

Putty Knife

Silicone Adhesive

Basin Wrench

Plumbers' Putty

Tubing Cutter

Tape

Measure

Hacksaw

Product names listed herein are trademarks of AS America, Inc. unless otherwise noted.

Drill

Saber Saw

Perimeter of Sink

Cutout

3/4 MIN.

Clip

3/4 MIN.

Clip

FOR MARBLE OR SOLID SURFACE COUNTERTOP

FOR WOOD COUNTERTOP

Mark and pre-drill the wood screw holes as located on the

enclosed template. Waterproof any exposed areas of wood.

To protect countertop, place it on a foam padding and drill

3/8 Dia. X 1/2 deep hole as per location shown on template.

NOTE: More specialized tools may be necessary to install this sink to countertop materials other than wood or wood composites.

Drill 1/8 dia. X 3/8 deep

#10 Wood Screw

Brass insert, epoxy in place

with threaded end exposed.

(Epoxy not supplied.)

#10-24

Machine screw

1 2

INSTALLATION INSTRUCTIONS 1
Shut-Off 2

Summary of Contents

Page 1 - INSTALLATION INSTRUCTIONS

UNDERCOUNTER SINKSINSTALLATION INSTRUCTIONSRectangular/Square Models: 0426, 0610, 0614, 0615, & 0618Observe Local Plumbing and Building Codes.Intr

Page 2 - Shut-Off

730555-100 Rev. CCenter bowl over cutout and tighten screws (see 3 or 4) to secure bowl to countertop. Remove excess sealant from inside lip.NOTE: The

Comments to this Manuals

No comments

American Standard 0615.000.020 Installation Guide

Browse online or download Installation Guide for Unknown American Standard 0615.000.020. American Standard 0615.000.020 Installation Guide User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Unknown American Standard 0615.000.020