K12
Revised 2/08
© 2008 AS America Inc.
LEXINGTON™
ELONGATED ONE-PIECE TOILET
VITREOUS CHINA
NOTES:
THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF
305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
*
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
IMPORTANT: Dimensions of xtures are nominal and may vary within the
range of tolerance established by ANSI Standard A112.19.2
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages.
470mm
(18-1/2)
C/L OF SEAT POST
HOLES (140mm
CENTERS)
(5-1/2)
362mm
(14-1/4)
743mm
(29-1/4)
219mm
(8-5/8)
152mm
(6)
324mm
(12-3/4)
FINISHED WALL
14mm
(9/16)
83mm
(3-1/4)
305mm
(12)
235mm
(9-1/4)
114mm
(4-1/2)
606mm
(23-7/8)
508mm
(20)
337mm
(6)
SUPPLY
AS
REQUIRED
FINISHED
FLOOR
*
C/L OF OUTLET
16mm
(5/8)
To Be Specied:
❑ Color:
❏ White ❏ Bone ❏ Linen ❏ Silver
❏ Fawn Beige ❏ Black
❑ Supply with Stop:
LEXINGTON™ ONE-PIECE TOILET
❑ 2037.100
• Vitreous china
• Low-consumption (6.0 Lpf/1.6 gpf)
• Low-prole, one-piece toilet
• Elongated siphon action bowl and tank with
concealed trapway
• Includes color-matched Rise and Shine™
plastic seat and cover (#5324.019) with
easy-to-clean, lift-off hinge system
• Fully-glazed trapway
• 100% factory ush tested
• Color-matched push button actuator
• Two color-matched bolt hole covers
Nominal Dimensions:
743 x 508 x 606mm
(29-1/4" x 20" x 23-7/8")
Fixture only, supply by others
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.2M for Vitreous China Fixtures -
includes Flush Performance, Ball Pass Diameter,
Trap Seal Depth and all Dimensions
Comments to this Manuals