American-standard Town Square Shower Walls 4834.SWTS User Manual

Browse online or download User Manual for Accessories for water American-standard Town Square Shower Walls 4834.SWTS. American Standard Town Square Shower Walls 4834.SWTS User Manual

  • Download
  • Add to my manuals
  • Print
  • Page
    / 5
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 0
CORIAN
®
SOLID SURFACE
BATH AND SHOWER WALLS
American Standard Inc. 2004
C
Installation Instructions
752770-100 Rev. B
752770-100 Rev. B
Thank you for selecting American-Standard...the benchmark of fine quality
for over 100 years. To ensure that your installation proceeds smoothly--please
read these instructions carefully before you begin.
Certified to comply with ANSI Z124.1;
Z-124-2; Z-124.3. Observe all local
plumbing and building codes.
1
BEFORE YOU BEGIN....
WALL SURFACE PREPARATION:
TOOLS:
TOOLS & MATERIALS REQUIRED....
Unpack your new shower walls and inspect them carefully for damage. Verify that the walls are the correct size for your
installation. Save the shipping carton to use as a template. Refer to American Standard roughing-in information for
specific dimensions for each model.
Corian
®
solid surface shower walls can be installed on water-proof drywall, plaster, Wonderboard
®
, or marine-grade
plywood. Regular drywall is not recommended.
NOTE
Take extra care in handling the front surfaces of the walls. Use only non-abrasive cloths to avoid scratching.
• Carbide Drill & Hole
Saw or Sabre Saw
• Tape Measure
• Caulking Gun
• Razor (Utility) Knife
• Grease Pencil
• Masking Tape
• Hot-Melt Glue Gun (optional)
• Level
• Denatured Alcohol
Solvent
1. Remove any loose pieces of wall surface and repair to make a flat, plumb and square surface.
2. Clean the surface with
denatured alcohol
to insure good panel bonding.
3. Prime or water seal raw plaster, wallboard or spackling prior to installation.
MATERIALS:
• 4 Tubes Clear Silicone Caulking For Shower
or 5 Tubes Clear Silicone Caulking For Bath
• Hot Melt Glue and/or props and/or braces
CORIAN® is a registered trademark of the DuPont Corporation.
1
HOTLINE FOR HELP
FOR TOLL FREE INFORMATION AND ANSWERS TO YOUR QUESTIONS, CALL:
1 (800) 442-1902, in Canada call 1 (800) 387-0369.
Weekdays 8:00 a.m. to 4:00 p.m. Eastern time.
TOWN SQUARE MODELS:
4834.SWTS, 3636.SWTS, 3838.CWTS, 6042.BWTS
OTHER MODELS:
3232.LSW, 3636.LSW, 4242.LSW, 4834.LSW, 6034.LSW
3636.LCW, 3838.LCW, 4242.LCW, 6060.LCW
6030.LBW, 6032.LBW, 7236.LBW
Corner Alcove Bath Tub
Page view 0
1 2 3 4 5

Summary of Contents

Page 1 - Installation Instructions

CORIAN® SOLID SURFACEBATH AND SHOWER WALLS American Standard Inc. 2004CInstallation Instructions752770-100 Rev. B752770-100 Rev. BThank you for

Page 2 - SHOWER BASE

2INSTALLATION PROCEDURES: American Standard Inc. 2004C752770-100 Rev. B2FIG.1FIG.2FIG.3FRONTFRONT EDGEOF TEMPLATECARDBOARDTEMPLATEFRONT EDGEOF PANEL(P

Page 3 - 752770-100 Rev. B

3PANEL INSTALLATION:1. Apply a 1/4" bead of silicone to each side of corner(s). Place corner pieces into corners and secure with props and/or bra

Page 4 - ALTERNATE BRACING METHOD:

4Pull panel away from the wall at the top and apply a dab of hot melt glue to subsurface at each panel corner. Immediately press entire panel into pos

Page 5 - PROODUCT

After the adhesive is set, remove the shim and caulk the exposed seams with silicone sealant. Exposed seams must be caulked with a clear or matching s

Comments to this Manuals

No comments